Measurements

Face: 60mm x 60mm 
Rear: 57.7mm round
Depth: 56 mm (including cable) mounted from front 
Depth: 70mm (including cable) mounted from rear
Display: 38mm x 23mm

Out-of-the-box capability of the unit

(Requires no additional sensors or hardware)

1. Battery voltage with high and low alarm 
2. Engine running hours with service timer
3. Inclinometer and artificial horizon - Only on special order
4. Oil pressure loss warning (from OEM oil pressure switch)
5. Coolant level alarm 
6. Ambient temperature (via unused EGT wires)

Additional features of unit

* Runs on any voltage from 10 to 30 Volts DC 
* Green backlit display 
* Ability to record all maximum values until reset 
* Voltage reversal and over voltage protection 
* Built in audible alarm 
* Built in Visual alarm 
* External relay output drive to cut the engine or for other uses such as cooling fan control 
* Easy to use menu system 
* The ability to calibrate your own sensors 
* The ability to set the multi gauge to page through your choice of displays at preset intervals or to display one feature only 
* The ability to disable any function/s if they are not required 
* 1 year warranty

Full Monitoring Potential of Unit

(Requires additional hardware purchased separately or as a kit)

1. Coolant temperature with high and low alarms 
2. Oil temperature with high and low alarms 
3. Oil/Boost/Fuel/Aux pressure with high and low alarms 
4. Exhaust gas temperature with high alarm

Fitting Locations

Mounted through a hole (57mm) in a panel like a conventional gauge.

Unit can be mounted from outside inwards or from inside outwards.